Siemens SCALANCE XC-100 Скачать руководство пользователя | Manualshive

Страница: 30 / 60

background image

Connecting up

5.1 Safety when connecting up

SCALANCE XC-100

30

Operating Instructions, 06/2016, C79000-G8976-C415-02

Safety notices when using the device according to Hazardous Locations (HazLoc)
If you use the device under HazLoc conditions you must also keep to the following safety

notices in addition to the general safety notices for protection against explosion:

WARNING

EXPLOSION HAZARD
DO NOT DISCONNECT WHILE CIRCUIT IS LIVE UNLESS AREA IS KNOWN TO BE

NON-HAZARDOUS.

Safety notices for use according to ATEX and IECEx
If you use the device under ATEX or IECEx conditions you must also keep to the following

safety notices in addition to the general safety notices for protection against explosion:

WARNING

Take measures to prevent transient voltage surges of more than 40% of the rated voltage.

This is the case if you only operate devices with SELV (safety extra-low voltage).

WARNING

Safety notice for connecting with a LAN ID (Local Area Network)
A LAN or LAN segment with all the interconnected devices should be contained completely

in a single low voltage power distribution in a building. The LAN is designed either for

“Environment A” according to IEEE802.3 or "Environment 0" according to IEC TR 62102.
Do not connect any electrical connectors directly to the telephone network (telephone

network voltage) or a WAN (Wide Area Network).

WARNING

EXPLOSION HAZARD
Do not press the SELECT/SET button when there is an explosive atmosphere.

«
...
28
29
30
31
32
...
»

Содержание SCALANCE XC-100





























































Отзывы:

Нет отзывов

Похожие инструкции для SCALANCE XC-100

Бренд: DANLERS Страницы: 2

Бренд: Daxten Страницы: 2

dominion kx III

Бренд: Raritan Страницы: 6

Бренд: Raritan Страницы: 5

DOMINION KSX II

Бренд: Raritan Страницы: 7

Бренд: Raritan Страницы: 2

Бренд: Edge-Core Страницы: 9

Бренд: GBC Страницы: 2

Elinx EIR418-2SFP-T

Бренд: B&B Electronics Страницы: 25

Бренд: CIS Страницы: 3

Бренд: Nextech Страницы: 4

Бренд: Moxa Technologies Страницы: 7

Бренд: TRENDnet Страницы: 2

SmartSTACK 100 ELS100-16TX

Бренд: Cabletron Systems Страницы: 16

Бренд: NVision Страницы: 92

Бренд: TRENDnet Страницы: 32

Бренд: Allied Telesis Страницы: 56

Бренд: Campbell Страницы: 10

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды