Siemens SCALANCE XB-100 Series Скачать руководство пользователя страница 28 | Manualshive

Страница: 28 / 54

background image

5.4

Power supply

Notes on the power supply

WARNING

Incorrect power supply
The power supply unit for supplying the devices must comply with NEC Class 2 or LPS:
● Voltage range 19.2 - 28.8 V for AC or DC
● Power consumption max. 450 mA for AC
● Power consumption max. 300 mA for DC
Do not operate the devices with AC voltages higher than 28.8 V AC.
Do not operate the devices with DC voltages higher than 28.8 V DC.

CAUTION

Damage to the device due to overvoltage
The connector of the external power supply is not protected against strong electromagnetic

pulses that can, for example, result from lightning strikes or switching large loads.
One of the tests used to attest the immunity of devices of the IE switches SCALANCE XB-100

to electromagnetic interference, among others, is the "surge immunity test" according to

EN61000-4-5. This test requires overvoltage protection for the power supply lines. A suitable

device is, for example, the Dehn Blitzductor BVT AVD 24, article number 918 422 or a

comparable protective element. An example of a suitable device for AC operation is the

Blitzductor BXT ML2 BD S 48, art. no. 920 245, in combination with the basic unit BXT BAS,

art. no. 920 300, or a comparable protective element.
Manufacturer: DEHN+SOEHNE GmbH+Co.KG, Hans-Dehn-Str.1, Postfach 1640, D92306

Neumarkt, Germany
Operate the SCALANCE XB-100 with suitable overvoltage protection.

Information on the power supply

● The power supply is connected using a 3-pin plug-in terminal block (spring-loaded terminal).

The terminal block ships with the device and can also be ordered as a spare part.

● The power supply can be connected redundantly. Both inputs are isolated. There is no

distribution of load.

● The power supply is connected over a high resistance with the enclosure to allow an

ungrounded set up. The two power inputs are non-floating.

● Note the wiring rules.

Connecting up
5.4 Power supply

SCALANCE XB-100

28

Operating Instructions, 02/2019, C79000-G8976-C473-03

«
...
26
27
28
29
30
...
»

Содержание SCALANCE XB-100 Series























































Отзывы:

Нет отзывов

Похожие инструкции для SCALANCE XB-100 Series

Бренд: DANLERS Страницы: 2

Бренд: Labgear Страницы: 4

ALTUSCN KH1508I

Бренд: ATEN Страницы: 173

Бренд: Ruby Tech Страницы: 2

Бренд: Nobile Страницы: 2

Sierra Pro XL 1608V5S

Бренд: Kramer Страницы: 2

PerfectView GPS300

Бренд: Waeco Страницы: 72

Бренд: Vega Страницы: 36

Бренд: Conceptronic Страницы: 7

Бренд: Comprehensive Страницы: 12

R-TEC Automation RTMWSR15C

Бренд: Rowley Страницы: 10

Бренд: Cypress Страницы: 4

Бренд: Madison Страницы: 2

Бренд: H3C Страницы: 96

Бренд: NVision Страницы: 86

Бренд: Extron electronics Страницы: 6

SIRCO MOT PV UL

Бренд: socomec Страницы: 20

XTCE095F F47 Series

Бренд: Eaton Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды