Product Characteristics
3.5 SCALANCE X101-1AUI TP-RJ-45 Interface
3.5
SCALANCE X101-1AUI TP-RJ-45 Interface
Connector pinout
RJ-45 jack
Figure
3-2
RJ-45 connector pinout
Pin number Pinout
Pin 8
NC
Pin 7
NC
Pin 6
TD-
Pin 5
NC
Pin 4
NC
Pin 3
TD+
Pin 2
RD-
Pin 1
RD+
On SCALANCE X101-1AUI, the twisted pair port is implemented as RJ-45 jack.
Notice
TP cords or TP-XP cords with a maximum length of 10
m can be connected to the RJ-45 TP
port.
Depending on the cable type, a total cable length of up to 100 m is permitted between two
devices with the IE FC cables and IE FC RJ-45 plug 180.
Note
The transmission mode of Scalance X101-1AUI is set to 10
Mbps half duplex.
Devices not supporting autonegotiation must be set to 10 Mbps / half duplex.
Industrial Ethernet Media Converters SCALANCE X-100 Series
3-4
Commissioning Manual, 06/2006, A2B00051526A, Product Version 03
