Siemens SCALANCE X-400 Скачать руководство пользователя страница 65

Страница: 65 / 164

Description

3.4 Description of the product

SCALANCE X-400
Operating Instructions, 06/2015, C79000-G8976-C186-12

Covers

Four CV490 2x100 covers are supplied with the twisted media module extender EM496-4.

The media module plug connectors are also protected from damage by protective caps.

Figure 3-31 Media module extender EM496-4 with media module MM491-2 in slot 12 and with cover

3.4.6

C-PLUG (configuration plug)

Application

The C-PLUG is an exchangeable medium for storage of the configuration data of the

modular switch and ships with the product. This means that the configuration data remains

available if the basic device is replaced.

Note
The C-PLUG must only be removed or inserted when the power supply to the device is

turned off.

Содержание SCALANCE X-400





































































































































































Результаты поиска

Содержание SCALANCE X-400

Отзывы:

Похожие инструкции для SCALANCE X-400

Бренды по названию

Популярные бренды

Siemens SCALANCE X-400, Руководство по эксплуатации

Результаты поиска

Содержание SCALANCE X-400

Отзывы:

Похожие инструкции для SCALANCE X-400

Бренды по названию

Популярные бренды