Siemens SCALANCE X-100 Скачать руководство пользователя страница 27

Страница: 27 / 78

SCALANCE X-100
Operating Instructions, 12/2016, A2B00060666-08

Assembly

4.1

Safety notices for installation

Safety notices

When installing the device, keep to the safety notices listed below.

WARNING

Ambient temperature above 55 °C
If a device is operated in an ambient temperature of more than 55 °C, the temperature of

the device housing may be higher than 70 °C. The device must therefore be installed so

that it is only accessible to service personnel or users that are aware of the reason for

restricted access and the required safety measures at an ambient temperature higher than

55 °C.

WARNING

If a SCALANCE X108PoE is operated at ambient temperatures between 55 °C and 60 °C,

there must be a minimum clearance of 40 mm to neighboring modules.

Safety notices on use in hazardous areas

General safety notices relating to protection against explosion

WARNING

EXPLOSION HAZARD
Replacing components may impair suitability for Class 1, Division 2 or Zone 2.

WARNING

The device may only be operated in an environment with pollution degree 1 or 2 (see IEC

60664-1).

Содержание SCALANCE X-100















































































Результаты поиска

Содержание SCALANCE X-100

Отзывы:

Бренды по названию

Популярные бренды

Siemens SCALANCE X-100, Руководство по эксплуатации

Результаты поиска

Содержание SCALANCE X-100

Отзывы:

Бренды по названию

Популярные бренды