Siemens scalance WLC711, Справочное руководство

Страница: 327 / 417

WLC.siemens.com
:wlans:CNL-7-CP:qos-policy# show priority-override
Priority override: enable
priority-override-dscp
Use the
priority-override-dscp
command to override existing DSCP codepoint assignments for
priority processing and use a single DSCP codepoint for the WLANS. The
priority-override-dscp
command is accessible from the wlan:<WLAN-service-name>:qos-policy context of the CLI.
After you run the
priority-override-dscp
command, run the
apply
command to implement the
changes.
priority-override-dscp 0-64
Parameters
0-64
Specifies a DSCP codepoint value. Default value: 0.
Usage
This command is only active if the
priority-override
command has been enabled. For more
information, see priority-override on page 326.
Example
The following example overrides all existing DSCP codepoint assignments and uses DSCP codepoint 2
for the CNL-7-CP WLANS:
WLC.siemens.com
:wlans:CNL-7-CP:qos-policy# priority-override-dscp 2
WLC.siemens.com
:wlans:CNL-7-CP:qos-policy# apply
WLC.siemens.com
:wlans:CNL-7-CP:qos-policy# show priority-override-dscp
DSCP marking: 2
priority-override-up
Use the
priority-override-up
command to override existing Service Class settings for priority
processing and configure a single Service Class value for the WLANS. The
priority-override-up
command is accessible from the wlan:<WLAN-service-name>:qos-policy context of the CLI.
After you run the
priority-override-up
command, run the
apply
command to implement the
changes.
priority-override-up 0-7
Parameters
0-7
Specifies a Service Class value. Default value: 1.
Usage
This command is only active if the
priority-override
command has been enabled. For more
information, see priority-override on page 326.
wlans Commands
priority-override-dscp
SCALANCE WLC711 CLI Reference Guide 327