Siemens SCALANCE W1750D UI, Руководство по настройке

Страница: 92 / 570

Customizing AP Settings
8.4 Configuring Radio Profiles for an AP
SCALANCE W1750D UI
92
Configuration Manual, 02/2018, C79000-G8976-C451-02
8.4 Configuring Radio Profiles for an AP
You can configure a radio profile on an AP either manually or by using the Adaptive Radio
Management (ARM) feature. ARM is enabled on SCALANCE W by default. It automatically
assigns appropriate channel and power settings for the APs. For more information on ARM,
see Adaptive Radio Management. (Page 341)
Configuring ARM-Assigned Radio Profiles for an AP
To enable ARM-assigned radio profiles:
1.
On the Access Points tab, click the AP to modify.
2. Click the edit link.
3. Click the Radio tab. The Radio tab details are displayed.
4. Select the Access mode.
5. Select the Adaptive radio management assigned option under the bands that are
applicable to the AP configuration.
6. Click OK.
Configuring Radio Profiles Manually for AP
Note
When radio settings are assigned manually by the administrator, the ARM is disabled.
To manually configure radio settings:
1.
On the Access Points tab, click the AP for which you want to enable ARM.
2. Click the edit link.
3. Click the Radio tab.
4. Ensure that an appropriate mode is selected.
By default, the channel and power for an AP are optimized dynamically using ARM. You
can override ARM on the 2.4 GHz and 5 GHz bands and set the channel and power
manually if desired. The following table describes various configuration modes for an AP.
Mode Description
Access In Access mode, the AP serves clients, while also monitoring for
rogue APs in the background.
If the Access mode is selected, perform the following actions:
1.
Select Administrator assigned in 2.4 GHz and 5 GHz band sec-
tions.
2. Select appropriate channel number from the Channel drop-down
list for both 2.4 GHz and 5 GHz band sections.
3. Enter appropriate transmit power value in the Transmit power text
box in 2.4 GHz and 5 GHz band sections.