Siemens SCALANCE TAP104, Руководство по эксплуатации

Страница: 25 / 48

4.7 Installation in a 19" mounting frame
The 19" mounting frame is for installation of 2 SCALANCE TAP devices in a 19" rack.
NOTICE
Approvals
The approvals according to ATEX, FM, IECEx, UL and UL Haz-Loc were not obtained in
conjunction with this type of installation.
Installation
1. Push the devices into the mounting frame.
2. Press the devices with slight pressure onto the back wall until the spring catch locks in place.
3. Screw the mounting frame in the 19" rack. For the precise dimensions, refer to the section
"Dimension drawings (Page 39)".
4. Connect the power supplies, refer to the section "Power supply (Page 32)".
5. Connect the device to the local network, refer to the section "Properties and functions
(Page 11)".
6. Connect the terminal via as short a cable as possible ≤ 150 mm and a large cross-sectional
area of 1.5 mm² to the functional ground of the system, see section "Grounding (Page 33)
“.
Dismantling
1. Disconnect all connected cables.
2. Loosen the attachment of the mounting frame.
Installation and disassembly
4.7 Installation in a 19" mounting frame
SCALANCE TAP
Operating Instructions, 06/2022, C79000-G8976-C447-03
25