Siemens SC73E610TI, Руководство по эксплуатации

Страница: 21 / 40

Operating the appliance en
21
Timer programming
Timer programming *
* depending on model
You can delay the start of the
programme in 1-hour steps up to
24 hours.
1. Close the door.
2. Switch on ON/OFF switch
(
.
3. Press button
H
until the digital
display
@
jumps to
œ
:
‹‚
.
4. Press button
H
until the displayed
time corresponds with your
requirements.
5. Press START button
8
, timer
programming is activated.
6. To delete the preselected starting
time, press the button
H
until
œ
is
indicated on the digital display.
You can change your programme
selection at any time until the
programme starts.
End of programme
The programme has ended when the
value
‹
:
‹‹
is indicated on the numerical
display
@
.
Switching off automatically
after the end of
the programme *
Switching off automatically after the end of the programme
* depending on model
To save energy, the dishwasher is
switched off 1 minute after the
programme ends (factory setting).
Automatic disconnection
can be adjusted from
˜
:
‹‹
to
˜
:
‹ƒ
.
1. Close the door.
2. Switch on ON/OFF switch
(
.
3. Press and hold down the START
button
8
.
4. Rotate programme selector
0
until
˜
:
‹
... s indicated on the digital
display
@
.
5. Release button.
The factory set value
˜
:
‹‚
is lit on
the digital display
@
.
To change the setting:
1.
Rotate programme selector
0
until
the required value is indicated on the
digital display
@
.
2. Press START button
8
.
The set value is saved.
˜
:
‹‹
Appliance does not switch off
automatically
˜
:
‹‚
Off after 1 min
˜
:
‹ƒ
Off after 120 min