©
Sieme
ns
AG
2003, M:\Mobil\R65\S65_
Pen
elope
\a
m
\fug\_v
on_i
tl\S65
_St
artup.fm
Security
28
VAR Langua
ge: a
m
; VAR issue
date: 040517
left page (28)
of S65 FUG us, A31008-H7400-A40-1-4A19 (02.06.2004, 19:50)
C
¢
T
¢
Security
¢
Codes
¢
Select function.
Change PIN2
(Display only if PIN 2 is available).
Proceed as for
Change PIN
.
Chg.phonecode
(Change phone code)
You define the phone code (4 to
8 digits) when you call up a phone-
code protected function for the first
time (e.g.
Direct call
, p. 37). It is then
valid for all phone-code protected
functions.
After the third unsuccessful attempt,
access to the phone code and the
functions that use it is denied. If this
occurs, contact Siemens Service
Clear SIM card barring
If the PIN is entered incorrectly three
times, the SIM card is barred. Enter
the PUK (MASTER PIN) provided by
your service provider with the SIM
card in accordance with the instruc-
tions. If the PUK (MASTER PIN) has
been lost, please contact your ser-
vice provider.
Preventing accidental
activation
Even if PIN control is deactivated
(p. 27) confirmation is required to
switch on the phone.
This prevents accidental activation
of the phone, e.g. when you are car-
rying it in a bag or travelling in an air-
craft.
B
Press and
hold
.
C
Press. The phone switches
on.
§Cancel§
Press this key or take no
action. The phone does
not switch on.
Additional information
Screensaver......................................p. 88
Further security settings..................p. 103