Chapter 5
Certification
RUGGEDCOM WIN5237
Installation Guide
34
IEEE
to radio or television reception, which can be determined by turning the device off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the device and receiver.
• Connect the device into an outlet on a circuit different from that to which the receiver is connected
• Contact Siemens Customer Support for assistance
IMPORTANT!
Changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate this device.
Section 5.1.7
IEEE
This subscriber station complies with the Mobile WiMAX Forum Wave 2 requirements defined by the following
Institute of Electrical and Electronics Engineers (IEEE) standards:
•
IEEE 802.16-2005
IEEE Standard for Local and Metropolitan Area Networks – Part 16: Air Interface for Fixed and Mobile Broadband
Wireless Access Systems – Amendment for Physical and Medium Access Control Layers for Combined Fixed and
Mobile Operation in Licensed Bands
Section 5.2
Environmental Type Tests
The RUGGEDCOM WIN5237 has passed the following environmental tests.
Test
Description
Test Levels
IEC 60068-2-1
Low Temperature
-25 °C for 72 hours
-40 °C (-40 °F) for 16 hours
-40 °C (-40 °F) for 72 hours
IEC 60068-2-2
High Temperature
55 °C (131 °F) for 72 hours
60 °C (140 °F) for 16 hours
70 °C (158 °F) for 72 hours
IEC 60068-2-11
MIL-STD-810F 509.4
Salt Fog
5% NaCI 35° 48h
IEC 60068-2-14
Temperature Change
-10 to 45 °C (14 to 113 °F) @ 0.5 °C/min (0.9 °F/min) for 2 cycles
-40 to -30 °C (-40 to -22 °F) @ 1 °C/min (1.8 °F/min) for 5 cycles
Water (Rain, Intensity)
0.01 m³/min (0.35 ft³/min @ 90 kPa (13 PSI) for 30 minutes
IEC 60068-2-18
IEC 529 (IP65/IP67)
Water (Rain)
0.01 m³/min @ 90 kPa (13 PSI) for 15 minutes
IEC 60068-2-6
Sine Vibration
Velocity: 5 mm/s
Displacement: 1.5 mm
Acceleration: 2 m/s²
