Siemens RUGGEDCOM WiN5100 Скачать руководство пользователя страница 79

Страница: 79 / 114

RUGGEDCOM WiN5100/WiN5200

User Guide

Chapter 6

CPE Management Interface

NTP Server

Event Name

Description

DuplicateNsiIp

Duplicate LAN IP address.

DuplicateRfiIp

Duplicate RF IP address.

CPELocked

The CPE Ethernet port is locked to forward user data.

Only management data is permitted from the LAN.

CPEUnlocked

The CPE Ethernet port is unlocked to forward user data.

ACLPacketDrop

If the maximum permitted number of access list

entries is exceeded, packets from any new host will

be dropped. In addition to a trap being sent at the

occurence, the trap will be sent every 1000 packets.

Section 6.2.11

NTP Server

Use the

NTP Server

pane to access the NTP server.

NOTE

Prior to enabling the NTP server, the

Time Advertisement Enabled

field must be set, on the GPS

pane in the base station. This field enables the NTP Server to work properly.

Procedure: Accessing the NTP Server

1. Click the

Management

button. The

Management

options appear in the options pane.

2. In the options panel, click the

NTP Server

link. The

NTP Server

pane appears.

Figure 61: NTP Server pane

3. Review and set the parameters in the following fields:

Table: NTP Server table

Field

Description

Enable Ntp Server

To set the NTP Server, select a value from this list.
Values: True | False

Содержание RUGGEDCOM WiN5100



















































































































Результаты поиска

Содержание RUGGEDCOM WiN5100

Отзывы:

Siemens RUGGEDCOM WiN5100, Руководство пользователя, Страница: 79 / 114

Результаты поиска

Содержание RUGGEDCOM WiN5100

Отзывы: