Siemens RUGGEDCOM WiN5100, Руководство пользователя, Страница: 59 / 114

RUGGEDCOM WiN5100/WiN5200
User Guide
Chapter 6
CPE Management Interface
Log Management 51
Section 6.2.6
Log Management
On the Syslog Configuration and Log Files panes, you configure the log management options.
Procedure: Setting Syslog Configuration Options
1. Click the Management button. The Management options appear in the options pane.
2. In the options panel, click the Log Management link. The Syslog pane appears.
Figure 45: Syslog pane
3. Review and set the syslog configuration parameters in the following fields:
Table: Syslog Configuration Fields
Field Description
Syslog Enable Enables or disables logging.
Values: Enable | Disable
Default: Disable
Server IP Sets the IP address of the server to which log files are uploaded. Type an IPv4 address.
Values: IPv4 address
Default: 0.0.0.0
UDP Port (1-65535) Sets the UDP port on the server to use when uploading the log files to the server. Type a value in
the range of 1 to 65535.
Values: Number in the range of 1 to 65535
Default: 514
4. Click the Apply button.
Section 6.2.7
Remote Management Parameters
On the Remote Management panes, you configure the management port, management VLAN, and DSCP
marking parameters: