Siemens RUGGEDCOM RX1510 Скачать руководство пользователя страница 87

Страница: 87 / 856

RUGGEDCOM ROX II

User Guide

Chapter 3

Device Management

Deleting a Remote Server Selector

Parameter

Description

negate

Excludes messages defined in the

Remote Server Selector

fields from the log. Selecting

this option acts as a logical NOT for the selector definition.
For example: Selecting

same

debug

, and

mail

in the

Comparison

Level

, and

Facility-

list

fields includes debug messages from the mail subsystem in the log. Selecting

Negate

excludes

debug messages from the mail subsystem from the log.

comparison

Synopsis:

same_or_higher, same

Default:

same_or_higher

The message severity levels to include in the log:
•

same:

includes only messages of the severity level selected in the

Level

field.

•

same_or_higher:

includes messages of the severity level selected in the

Level

field,

and all messages of higher severity.

For example:
• Selecting

debug

in the

Level

field and

same

in the

Comparison

field includes only

debug messages in the log.

• Selecting

debug

in the

Level

field and

same_or_higher

in the

Comparison

field

includes debug and all higher severity messages in the log.

level

Synopsis:

emerg, alert, crit, err, warning, notice, info, debug, none, all

Default:

all

The base message severity level to include in the log.

all

includes all messages.

none

excludes all messages. Other levels are listed in order of increasing severity.

facility-list

Synopsis:

auth, authpriv, cron, daemon, ftp, kern, lpr, mail, news, security, syslog,

user, uucp, local0, local1, local2, local3, local4, local5, local6, local7, all

Synopsis:

"facility-list" occurs in an array of at least 1 and at most 8 elements

The subsystems generating log messages. Messages from the selected subusystems

are included in the log. At least one subsystem must be selected; up to 8 subsystems

can be selected.

7. Click

Commit

to save the changes or click

Revert All

to abort. A confirmation dialog box appears. Click

to proceed.

8. Click

Exit Transaction

or continue making changes.

Section 3.9.5.3

Deleting a Remote Server Selector

To delete a remote server selector, do the following:
1. Change the mode to

Edit Private

Edit Exclusive

2. Navigate to

admin

logging

server

{address}

selector

, where

{address}

is the IP address of the

remote server. The

Remote Server Selector

table appears.

Содержание RUGGEDCOM RX1510

























































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание RUGGEDCOM RX1510

Отзывы:

Бренды по названию

Популярные бренды

Siemens RUGGEDCOM RX1510, Руководство пользователя

Результаты поиска

Содержание RUGGEDCOM RX1510

Отзывы:

Бренды по названию

Популярные бренды