Siemens RUGGEDCOM RX1510, Руководство пользователя

Страница: 549 / 856

RUGGEDCOM ROX II
User Guide
Chapter 5
Setup and Configuration
Deleting a Prefix Entry 517
Section 5.21.4.6
Deleting a Prefix Entry
To delete an entry for a dynamic OSPF prefix list, do the following:
1. Change the mode to
Edit Private or Edit Exclusive .
2. Depending on the dynamic routing protocol being configured, navigate to routing » dynamic » ospf »
filter » {name} » entry , where {name} is the name of the prefix list. The Prefix List Entry table appears.
2
1
3
Figure 593: Prefix List Entry Table
1. Add Button 2. Edit Button 3. Delete Button
3. Click Delete next to the chosen entry.
4. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
5. Click Exit Transaction or continue making changes.
Section 5.21.5
Managing Areas
Network areas determine the regions within which routes are distributed to other routers. The subnets at a
particular router can be added to its OSPF Area. The router will advertise these subnets to all routers in its area.
OSPF areas must be designed such that no single link failure will cause the network to be split into two disjointed
networks.
A router can be part of multiple areas and function as a gateway between areas. When multiple areas are used
on a network, area zero (0) is the backbone area. All areas must have a router connecting them to area zero (0).
The following sections describe how to configure and manage network areas for dynamic OSPF routes:
•
Section 5.21.5.1, “Viewing a List of Areas”
• Section 5.21.5.2, “Adding an Area”
• Section 5.21.5.3, “Deleting an Area”