Siemens RUGGEDCOM RX1510, Руководство пользователя, Страница: 385 / 856

RUGGEDCOM ROX II
User Guide
Chapter 5
Setup and Configuration
Deleting an IP Pool 353
9. Add one or more Option82 classes to the pool. For more information, refer to Section 5.15.16.2, “Adding an
Option 82 Class to an IP Pool” .
10. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
11. Click Exit Transaction or continue making changes.
Section 5.15.13.3
Deleting an IP Pool
To delete an IP pool, do the following:
1. Change the mode to
Edit Private or Edit Exclusive .
2. Navigate to services » dhcpserver » subnet » {name} » options » ippool , where {name} is the name of
the subnet. The IP Pool Configuration table appears.
2 3 1
Figure 383: IP Pool Configuration Table
1. Add Button 2. Edit Button 3. Delete Button
3. Click Delete next to the chosen pool.
4. Click
Commit
to save the changes or click
Revert All
to abort. A confirmation dialog box appears. Click
OK
to proceed.
5. Click Exit Transaction or continue making changes.
Section 5.15.14
Managing IP Ranges for Subnets
The following sections describe how to configure and manage IP ranges for DHCP subnets:
•
Section 5.15.14.1, “Viewing a List of IP Ranges for Subnets”
• Section 5.15.14.2, “Adding an IP Range to a DHCP Subnet”
• Section 5.15.14.3, “Deleting an IP Range From a Subnet”