Siemens RUGGEDCOM RX1510, Руководство пользователя

Страница: 163 / 856

RUGGEDCOM ROX II
User Guide
Chapter 3
Device Management
Deleting a Device Address Table 131
Parameter Description
remote-ip The IP address of the remote host that provides a connection to the DNP device with
the configured address. Leave this field empty to forward DNP messages that match the
configured address to the local serial port.
remote-device Enables forwarding of DNP messages that match the device address to the remote IP.
7. Click
Commit
to save the changes or click
Revert All
to abort. A confirmation dialog box appears. Click
OK
to proceed.
8. Click Exit Transaction or continue making changes.
Section 3.21.10.3
Deleting a Device Address Table
To delete a Device Address table, do the following:
1. Change the mode to
Edit Private or Edit Exclusive .
2. Navigate to interface
»
serial
»
{slot/port}
»
protocols
»
dnp
»
setdnp
»
device-table , where
{slot/port}
is the slot name and port number of the serial port. The DNP Device Address Table Configuration table
appears.
1 2 3
Figure 131: DNP Device Address Table Configuration Table
1. Add Button 2. Edit Button 3. Delete Button
3. Click Delete next to the chosen Device Address table.
4. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
5. Click Exit Transaction or continue making changes.
Section 3.21.11
Managing Remote Hosts
Remote hosts are required when the UDP transport connection protocol is selected for the raw socket protocol.
The following sections describe how to configure and manage remote hosts:
•
Section 3.21.11.1, “Viewing a List of Remote Hosts”
• Section 3.21.11.2, “Adding a Remote Host”