manualshive.com logo in svg

Siemens RUGGEDCOM RX1510, Руководство по установке

Поделиться
Скачать
Siemens RUGGEDCOM RX1510 Скачать руководство пользователя страница 34

Modules

4

The RUGGEDCOM RX1510 features slots for up to two field-replaceable line modules,

which can be used to expand and customize the capabilities of the device to suit spe-

cific applications. A variety of modules are available, each featuring a specific type of

communication port: copper Ethernet, fiber optic Ethernet, SFP, WAN, cellular mo-

dem and DDS. The RUGGEDCOM APE (Application Processing Engine) line module,

a utility-grade computing platform for running third-party applications directly from

within the RUGGEDCOM RX1510, is also available.
Modules can be installed in any one of the available slots in the device chassis.
Use the RUGGEDCOM RX1510 software to determine which ports are equipped on

the device. For more information, refer to the 

 RUGGEDCOM RX1510 User Guide

 for

the device.

Note

Only one T1/E1 WAN module and up to two DDS modules are supported.

4

3

2

1

     1    

Slot 1

     2    

Slot 2

     3    

Slot 3

     4    

Slot 4

Figure 4.1

Available Chassis Slots

RUGGEDCOM RX1510

Installation Manual, 12/2019, C79000-G8976-1055-16

25

Содержание RUGGEDCOM RX1510































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды