Siemens RUGGEDCOM RX1400 Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 66

background image

Introduction

1

The RUGGEDCOM RX1400 is a multi-protocol intelligent node that combines Ethernet

switch, routing and firewall functionality with various wide area connectivity options.
The RUGGEDCOM RX1400 switch, with its rugged metal housing, is designed for DIN

rail, panel or rack mounting.
The RUGGEDCOM RX1400 provides a high level of immunity to electromagnetic in-

terference, heavy electrical surges, extreme temperature and humidity for reliable

operation in harsh environments.
The device has IP40 degree protection, does not use internal fans for cooling and

supports a -40 to 85 °C (-40 to 185 °F) extended temperature range. It is also certi-

fied for use in Class I, Division 2, Zone 2 hazardous locations.
Primary benefits include:
• Cost effective solution for large scale deployments
• Space-saving installation
• Reduced maintenance costs
• Customer data protection
• Support for additional applications
The RUGGEDCOM RX1400 is designed to support primary communications over pub-

lic mobile networks and leverage enhanced capabilities of mobile networks, while

making reliable and secure connections for mission critical applications in electric

utility substations, traffic control cabinets, railway applications, oil and gas and other

harsh environment applications.

NOTICE

To comply with FCC regulations, this device must only be used for mobile and fixed

applications.

1.1

Feature Highlights

Cellular Interface

• LTE: 700- B13, B17,

800/900/1800/2100/2600 MHz

• UMTS/HSPA+: 850/900/1900/2100

MHz

• Quad-Band EDGE/GPRS/GSM
• GNSS

WLAN Interface

• WLAN Access Point and Client:

WLAN Direct® (multi-channel, mul-

ti-role) dual band transceiver sup-

port of IEEE 802.11a/b/g/n for 2.4

GHz and 5 GHz

RUGGEDCOM RX1400

Installation Manual, 09/2019, C79000-G8976-1103-13

1

«
...
8
9
10
11
12
...
»

Содержание RUGGEDCOM RX1400



































































Отзывы:

Нет отзывов

Похожие инструкции для RUGGEDCOM RX1400

Бренд: C.M.O Страницы: 10

Бренд: NARGESA Страницы: 37

Бренд: NARGESA Страницы: 6

Бренд: S&C Страницы: 27

Бренд: S&C Страницы: 56

IntelliRupter PulseCloser

Бренд: S&C Страницы: 16

Бренд: S&C Страницы: 76

UBA Pro RT Series

Бренд: JCM GLOBAL Страницы: 196

Бренд: Stromag Страницы: 104

Бренд: D+H Страницы: 20

Бренд: DFI Страницы: 16

Бренд: B&G Страницы: 30

Бренд: Microcanner Страницы: 32

DISC-O-FLEX RLM

Бренд: RATHI Страницы: 16

Бренд: Balluff Страницы: 20

BTL6-P510-M-E2/E28-KA/LA Series

Бренд: Balluff Страницы: 16

Бренд: CDL Страницы: 2

Loc Check A5900/ Series

Бренд: Hasco Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды