Siemens RUGGEDCOM RX1100P, Руководство по установке

Страница: 26 / 50

Chapter 3
Communication Ports
RUGGEDCOM RX1100P
Installation Guide
20 DSL Ports
Pin Description
6 Reserved (Do Not Connect)
7 Reserved (Do Not Connect)
8 Reserved (Do Not Connect)
Section 3.4
DSL Ports
The RX1100P can optionally be equipped with a dual-port DSL (Digital Subscriber Line) card, which can
communicate over standard telephone communication lines. The DSL card supports the following modulation
standards:
• G.992.1 (G.DMT)
• G.992.2 (G.Lite)
• G.992 Annex A (ADSL over POTS)
Each DSL card is equipped with standard RJ11 telephone ports. The following is the pin-out description for the
RJ11 ports:
1 6
Figure 22: RJ11 Port Port Pin Configuration
Pin Description
1 Reserved (Do Not Connect)
2 Reserved (Do Not Connect)
3 Ring
4 Tip
5 Reserved (Do Not Connect)
6 Reserved (Do Not Connect)
Section 3.5
DDS Ports
The RX1100P can optionally be equipped with a 56/64 kbps DDS (Data Distribution Service) card that uses
standard RJ45 receptacles.
The following is the pin-out for the DDS ports:
1 8
Figure 23: DDS RJ45 Port Pin Configuration
Pin Name Description
1 R1 Transmit data to
network (Ring 1)
2 T1 Transmit data to
network (Tip 1)
3 Reserved (Do Not Connect)
4 Reserved (Do Not Connect)