Siemens RUGGEDCOM RSG2100, Руководство по установке

Страница: 39 / 54

RUGGEDCOM RSG2100
Installation Guide
Chapter 4
Technical Specifications
Copper Ethernet Port Specifications 31
Standard 10 Mbps Ports 100 Mbps Ports 1000 Mbps Ports Description
IEEE 802.1x
ü ü ü
Port-Based Network Access Control
IEEE 802.1Q-2005
(formerly 802.1s)
ü ü ü
Multiple Spanning Tree Protocol (MSTP)
Section 4.4
Copper Ethernet Port Specifications
The following details the specifications for copper Ethernet ports that can be ordered with the RUGGEDCOM
RSG2100.
NOTE
• Maximum segment length is greatly dependent on factors such as fiber quality, and the number
of patches and splices. Consult a Siemens sales associate when determining maximum segment
distances.
• All optical power numbers are listed as dBm averages.
• F51 transceivers are rated for -40 to 85 °C (-40 to 185 °F).
Connector Speed Duplex
i
Cable Type
j
Wiring
Standard
k
Maximum
Distance
l
Isolation
m
RJ45 10/100 Mbps FDX/HDX > CAT-5 TIA/EIA T568A/B 100 m (328 ft) 1.5 kV
RJ45 1000 Mbps FDX/HDX > CAT-5 TIA/EIA T568A/B 100 m (328 ft) 1.5 kV
micro-D 10/100 Mbps FDX/HDX > CAT-5 TIA/EIA T568A/B 100 m (328 ft) 1.5 kV
micro-D 1000 Mbps FDX/HDX > CAT-5 TIA/EIA T568A/B 100 m (328 ft) 1.5 kV
i
Auto-Negotiating
j
Shielded or unshielded.
k
Auto-crossover and auto-polarity.
l
Typical distance. Dependent on the number of connectors and splices.
m
RMS 1 minute.
Section 4.5
Fiber Optic Ethernet Port Specifications
The following details the specifications for fiber Ethernet ports that can be ordered with the RUGGEDCOM
RSG2100.