Siemens RUGGEDCOM RS930L Скачать руководство пользователя страница 10

Страница: 10 / 48

Introduction

The RUGGEDCOM RS930L is an 6-port utility-grade, fully managed Ethernet switch

with Ethernet over VDSL (EoVDSL) capabilitiies, designed to operate reliably in

electrically harsh and climatically demanding environments.
EoVDSL supports LAN segments of up to 5 km (3.1 mi) over telephone grade cable

(or other legacy serial cabling) at up to 35 Mbps (upstream and downstream). It

allows an Ethernet-enabled device to communicate with a central control room

using existing cabling. The RUGGEDCOM RS930L can be equipped with dual EoVDSL

interfaces, making it ideal for right or loop network architecture. It is the perfect

solution for bringing Ethernet networking to applications where existing wiring

is already present, thus saving the considerable cost of upgrading existing legacy

devices or installing new network cabling.
The RUGGEDCOM RS930L provides a high level of immunity to electromagnetic

interference and heavy electrical surges typical of environments found on plant

floors and curb-side traffic control cabinets. An operating temperature range of

-40 to 85 °C (-40 to 185 °F) coupled with hazardous location certification (Class I

Division 2), optional conformal coating and a galvanized steel enclosure allows the

RUGGEDCOM RS930L to be placed in almost any location.
The RUGGEDCOM RS930L can be mounted on a DIN rail or panel for efficient use of

cabinet space.
The integrated power supply supports a wide range of voltages (88-300 VDC or

85-264 VAC) for worldwide operability.
The RUGGEDCOM RS930L 's superior ruggedized design and embedded RUGGEDCOM

Rugged Operating System (ROS) provides superior system reliability and advanced

networking features making it ideally suited for creating Ethernet networks for

mission-critical, real-time, control applications.

1.1

Feature Highlights

Ethernet Ports

• 6 x 10/100Base-TX copper Ethernet ports

Ethernet Over VDSL (EoVDSL)

• Up to 2 x Ethernet over VDSL (EoVDSL) ports
• Up to 5 km (3.1 mi) LAN segments
• Symmetric data rates up to 35 Mbps
• Asymmetric data rates up to 40 Mbps

RUGGEDCOM RS930L

Installation Manual, 04/2021, C79000-G8976-1034-09

Содержание RUGGEDCOM RS930L

















































Результаты поиска

Содержание RUGGEDCOM RS930L

Отзывы:

Похожие инструкции для RUGGEDCOM RS930L

Бренды по названию

Популярные бренды

Siemens RUGGEDCOM RS930L, Руководство пользователя

Результаты поиска

Содержание RUGGEDCOM RS930L

Отзывы:

Похожие инструкции для RUGGEDCOM RS930L

Бренды по названию

Популярные бренды