Siemens RUGGEDCOM RS910L Скачать руководство пользователя

Страница: 6 / 50

Preface

This guide describes the RUGGEDCOM RS910L. It describes the major features of the

device, installation, commissioning and important technical specifications.
It is intended for use by network technical support personnel who are responsible

for the installation, commissioning and maintenance of the device. It is also recom-

mended for use by network and system planners, system programmers, and line

technicians.

Related Documents

Other documents that may be of interest include:

Document Title

Link

RUGGEDCOM ROS Configuration

Manual

https://support.industry.siemens.com/cs/ww/en/view/109737222

Accessing Documentation

The latest user documentation for RUGGEDCOM RS910L is available online at

https://-

support.industry.siemens.com

. To request or inquire about a user document, con-

tact Siemens Customer Support.

Disclaimer of Liability

Siemens has verified the contents of this document against the hardware and/or soft-

ware described. However, deviations between the product and the documentation

may exist.
Siemens shall not be liable for any errors or omissions contained herein or for conse-

quential damages in connection with the furnishing, performance, or use of this ma-

terial.
The information given in this document is reviewed regularly and any necessary cor-

rections will be included in subsequent editions. We appreciate any suggested im-

provements. We reserve the right to make technical improvements without notice.

Registered Trademarks

RUGGEDCOM ™ and ROS™ are trademarks of Siemens AG.

RUGGEDCOM RS910L

Installation Manual, 02/2020, C79000-G8976-1030-06

Содержание RUGGEDCOM RS910L



















































Результаты поиска

Содержание RUGGEDCOM RS910L

Отзывы:

Похожие инструкции для RUGGEDCOM RS910L

Бренды по названию

Популярные бренды

Siemens RUGGEDCOM RS910L, Руководство по установке

Результаты поиска

Содержание RUGGEDCOM RS910L

Отзывы:

Похожие инструкции для RUGGEDCOM RS910L

Бренды по названию

Популярные бренды