Siemens RUGGEDCOM RS900L Скачать руководство пользователя страница 10

Страница: 10 / 50

Introduction

The RUGGEDCOM RS900L is an 6-port utility-grade, fully managed Ethernet switch

with Ethernet over VDSL (EoVDSL) capabilitiies, designed to operate reliably in

electrically harsh and climatically demanding environments.
EoVDSL supports LAN segments of up to 5 km (3.1 mi) over telephone grade cable

(or other legacy serial cabling) at up to 35 Mbps (upstream and downstream). It

allows an Ethernet-enabled device to communicate with a central control room

using existing cabling. It is the perfect solution for bringing Ethernet networking to

applications where existing wiring is already present, thus saving the considerable

cost of upgrading existing legacy devices or installing new network cabling.
The RUGGEDCOM RS900L provides a high level of immunity to electromagnetic

interference and heavy electrical surges typical of environments found on plant

floors and curb-side traffic control cabinets. An operating temperature range of

-40 to 85 °C (-40 to 185 °F) coupled with hazardous location certification (Class I

Division 2), optional conformal coating and a galvanized steel enclosure allows the

RUGGEDCOM RS900L to be placed in almost any location.
The RUGGEDCOM RS900L can be mounted on a DIN rail or panel for efficient use of

cabinet space.
The integrated power supply supports a wide range of voltages (88-300 VDC or

85-264 VAC) for worldwide operability, as well as dual-redundant, reversible polarity,

24 VDC and 48 VDC power supply inputs for high availability applications requiring

dual or backup power inputs.
The RUGGEDCOM RS900L 's superior ruggedized design and embedded RUGGEDCOM

Rugged Operating System (ROS) provides superior system reliability and advanced

networking features making it ideally suited for creating Ethernet networks for

mission-critical, real-time, control applications.

1.1

Feature Highlights

Ethernet Ports

• 6 x 10/100Base-TX copper Ethernet ports
• [Optional] Up to 2 x additional 10/100Base-TX copper or 10/100Base-FX fiber

optic Ethernet ports

Ethernet Over VDSL (EoVDSL)

• 1 x Ethernet over VDSL (EoVDSL) ports
• Up to 5 km (3.1 mi) LAN segments
• Symmetric data rates up to 35 Mbps

RUGGEDCOM RS900L

Installation Manual, 04/2021, C79000-G8976-1027-09

Содержание RUGGEDCOM RS900L



















































Результаты поиска

Содержание RUGGEDCOM RS900L

Отзывы:

Похожие инструкции для RUGGEDCOM RS900L

Бренды по названию

Популярные бренды

Siemens RUGGEDCOM RS900L, Руководство по установке

Результаты поиска

Содержание RUGGEDCOM RS900L

Отзывы:

Похожие инструкции для RUGGEDCOM RS900L

Бренды по названию

Популярные бренды