Device Management
3.2 Configuring the Device
3.2
Configuring the Device
Once the device is installed and connected to the network, it must be configured.
All configuration management is done via the RUGGEDCOM ROS interface. For more
information about configuring the device, refer to the "RUGGEDCOM RS8000H
Configuration Manual" associated with the installed software release.
3.3
Resetting the Device
The RUGGEDCOM RS8000H can be reset (rebooted) using the
RESET
button. The
RESET
button is recessed and can only be reached using a pin or small screwdriver.
To reset the device, quickly press and release the
RESET
button with a pin.
18
RUGGEDCOM RS8000H
Installation Manual, 12/2021, C79000-G8976-1022-06
