Installing Device
2.1.2 Mounting the Device on a DIN Rail
2.1.2
Mounting the Device on a DIN Rail
For DIN rail installations, the RUGGEDCOM RS1600F can be equipped with panel/DIN
rail adapters pre-installed on each side of the chassis. The adapters allow the device
to be slid onto a standard 35 mm (1.4 in) DIN rail.
To mount the device to a DIN rail, do the following:
1. Align the adapters with the DIN rails and slide the device into place.
2
1
3
3
1
Panel/DIN Rail Adaptor
2
DIN Rail
3
Screw
Figure 2.2
DIN Rail Mounting
2. Install one of the supplied screws on either side of the device to secure the
adapters to the DIN rails.
2.1.3
Mounting the Device to a Panel
For panel installations, the RUGGEDCOM RS1600F can be equipped with panel/DIN
rail adapters pre-installed on each side of the chassis. The adapters allow the device
to be attached to a panel using screws.
RUGGEDCOM RS1600F
Installation Manual, 01/2021, C79000-G8976-1014-03
7
Содержание RUGGEDCOM RS1600F
Страница 9: ...Preface Contacting Siemens viii RUGGEDCOM RS1600F Installation Manual 01 2021 C79000 G8976 1014 03 ...
Страница 26: ...Communication Ports 4 RUGGEDCOM RS1600F Installation Manual 01 2021 C79000 G8976 1014 03 17 ...
Страница 27: ...Communication Ports 18 RUGGEDCOM RS1600F Installation Manual 01 2021 C79000 G8976 1014 03 ...