Siemens RUGGEDCOM ROX II, Руководство пользователя

Страница: 69 / 798

RUGGEDCOM ROX II
CLI User Guide
Chapter 2
Using RUGGEDCOM ROX II
Tracing a Route to an IPv6 Host 23
ruggedcom# traceroute 192.168.0.7
traceroute to 192.168.0.7 (192.168.0.7), 30 hops max, 60 byte packets
1 * * *
2 * * *
3 * * *
4 * * *
5 * * *
.
.
.
Section 2.4.6
Tracing a Route to an IPv6 Host
To trace a route to an IPv6 host, do the following:
traceroute6 address
Where
address
is the name or IP address of the remote host
The results of the trace are displayed. For example:
ruggedcom# traceroute6 2001:0db8:85a3:0000:0000:8a2e:0370:7334
traceroute to 2001:0db8:85a3:0000:0000:8a2e:0370:7334 (2001:0db8:85a3:0000:0000:8a2e:0370:7334), 30
hops max, 60 byte packets
1 * * *
2 * * *
3 * * *
4 * * *
5 * * *
.
.
.
Section 2.4.7
Tracing a Route to an MPLS Endpoint
To trace a route to an MPLS endpoint, do the following:
mpls-traceroute
address
Where address is the IPv4 address of the MPLS trace route
Section 2.4.8
Tracing a Route to a VRF Endpoint
To trace a route to a VRF endpoint, do the following:
vrf-traceroute
vrfname name
Where
name
is the VRF endpoint