Siemens RUGGEDCOM ROX II, Руководство пользователя

Страница: 612 / 798

Chapter 13
Unicast and Multicast Routing
RUGGEDCOM ROX II
CLI User Guide
566 Deleting a VRF Instance
Parameter Description
The metric type for default route.
route-map { route-map } Synopsis: A string
The route map name.
external { external } Synopsis: A 32-bit unsigned integer between 1 and 255
The administrative distance for external routes.
inter-area { inter-area } Synopsis: A 32-bit unsigned integer between 1 and 255
The administrative distance for inter-area routes.
intra-area { intra-area } Synopsis: A 32-bit unsigned integer between 1 and 255
The administrative distance for intra-area routes.
3. Configure prefix list filters for the VRF instance. For more information, refer to Section 13.9.4.3, “Adding a
Prefix List” .
4. Configure areas for the VRF instance. For more information, refer to Section 13.9.5.2, “Adding an Area” .
5. Configure route map filters for the VRF instance. For more information, refer to Section 13.9.6.3, “Adding a
Route Map Filter” .
6. Configure redistribution metrics for the VRF instance. For more information, refer to Section 13.9.8.2,
“Adding a Redistribution Metric” .
7. Configure interfaces for the VRF instance. For more information, refer to Section 13.9.9.2, “Configuring a
Routing Interface” .
8. Type commit and press Enter to save the changes, or type revert and press Enter to abort.
Section 13.11.7.3
Deleting a VRF Instance
To delete a VRF instance under OSPF, do the following:
1. Make sure the CLI is in Configuration mode.
2. Delete the definition key by typing:
no
routing ospf vrf name
Where:
•
name
is the name of the VRF instance
3. Type commit and press Enter to save the changes, or type revert and press Enter to abort.
Section 13.11.8
Managing IP/VPN Tunnels
IP/VPN tunnels use the VPNv4 protocol to exchange customer prefixes (i.e. route distributions and route targets)
and labels between Provider Edge (PE) routers. IP/VPNs provide isolation of the interfaces connecting each end of
the VPN.