manualshive.com logo in svg

Siemens RK512 Driver, Руководство по подключению, Страница: 20 / 20

Поделиться
Скачать
Siemens RK512 Driver Скачать руководство пользователя страница 20

SIMATIC S7 3964(R)/RK512 Driver

GP-Pro EX Device/PLC Connection Manual

20

8

Error Messages

Error messages are displayed on the Display screen as follows: "No.: Device Name: Error Message (Error 

Occurrence Area)". Each description is shown below.

Display Examples of Error Messages

"RHAA035: PLC1: Error has been responded for device write command (Error Code: 2 [02])"

Item

Description

No.

Error No.

Device Name

Name of the External Device where error occurs. Device name is a title of the External 
Device set with GP-Pro EX. (Initial value [PLC1])

Error Message

Displays messages related to the error which occurs.

Error Occurrence Area

Displays IP address or device address of the External Device where error occurs, or error 
codes received from the External Device.

• Received error codes are displayed such as "Decimal [Hex]".
• IP address is displayed such as "IP address (Decimal): MAC address (Hex)".

• Please refer to the manual of the External Device for more detail of received error codes.

Содержание RK512 Driver





















Отзывы:

Нет отзывов