Cleaning the server
Preparation for use and operation
A26361-K412-Z107-3-7619
25
i
Note on
SCO UNIX
The DAC manual mentions the utility
DAC960
when describing
SCO UNIX
installation. The name for this utility is no longer correct. Enter
mdac
instead.
Note on
Novell Netware 3.12
:
If you want to install
Novell Netware 3.12
, you must first set the
APIC
function (if existing) to
Disabled
in the Advanced menu in the
BIOS Setup
.
Descriptions of operating systems not covered in the DAC manual are
provided in the appropriate readme files on the driver diskettes.
Cleaning the server
!
Switch the server off and pull the power plug out of the grounded-contact
power socket.
Do not clean any interior parts yourself, leave this job to a service
technician.
Do not use any cleaning agents that contain abrasives or may corrode
plastic.
Ensure that no liquid enters the system.
Ensure that the ventilation areas of the server and the monitor are free.
Wipe the server and monitor casing with a dry cloth. If particularly dirty, use a cloth
which has been moistened in mild domestic detergent and then carefully wrung
out.
Use a cloth for disinfection to clean the keyboard and the mouse.