Configuring the server
Preparation for use and operation
A26361-K412-Z107-3-7619
23
The following EISA configuration disks are supplied with your server:
•
Configuration Utility Disk
•
Configuration Library Disk with additional CFG files
Ê
Deactivate the write protection and insert the configuration utility disk into the
floppy disk drive.
Ê
Switch your server on.
Having run through its self-test, the server starts the EISA configuration utility from
the floppy disk. The company logo appears on screen.
Ê
Press any key to continue.
The welcome screen is displayed.
Ê
Press the Enter key.
The
main menu
appears.
Ê
Select the item
Maintain system configuration diskette
, and press the Enter key.
The
Maintain System Configuration Diskette
menu is displayed.
i
Press the Enter key to move forwards one menu level, press
[Esc]
[Esc]
[Esc]
[Esc]
to
move back one level or to Exit. Help texts are either displayed
automatically or can be called up by pressing the
[F1]
[F1]
[F1]
[F1]
key.
Ê
Select the item
Create a backup SCI file
, and press the Enter key.
The
Save System Configuration Information (SCI) File Description
menu appears.
Ê
Enter a description of the contents of the file, e.g.,
factory configuration
, and
press the Enter key.
The system reports that an SCI file was created successfully on the configuration
program disk.
Ê
Press the Enter key.
The
Maintain System Configuration Diskette
menu is displayed.
Ê
Select the item
Exit
and press the Enter key.
The
main menu
appears.
Ê
Select the item
Exit
from this utility and press the Enter key twice.
This exits the EISA configuration program.
