Switching the server on and off
Preparation for use and operation
A26361-K412-Z107-3-7619
21
Switching the server on and off
2
1
Ê
Press the ON/OFF switch (1).
If the server is switched on, the power-on indicator (2) lights up green. The server
runs a self-test immediately it is switched on.
!
If after switching on the server there is nothing but flickering stripes on the
screen, switch the server off immediately (see "
-
Flickering stripes on the monitor screen
").
The ON/OFF switch does not cut off line voltage from the server. To
disconnect the line voltage completely, remove the power plug from the
grounded power outlet.
The server can be switched on not only at the ON/OFF switch but also in the
following ways:
•
At a specified time,
set in the
ServerView
program.
•
With the ring indicator of a modem,
when the ring indicator is activated by an incoming call.
•
•
•
•
Automatically following a power failure,
when the server was switched on prior to the power failure.