Siemens Building
Siemens Building
Siemens Building
Siemens Building
Siemens Building T
TT
TTec
ec
ec
ec
echnologies
hnologies
hnologies
hnologies
hnologies
Fire S
Fire S
Fire S
Fire S
Fire Safety
afety
afety
afety
afety
P/N 315-033070-4
INTRODUCTION
The
SIEMENS
Model PMI/PMI-REM/PMI-INTL is the user interface for the FireFinder-
XLS™ system. From the PMI/PMI-REM/PMI-INTL the operator can acknowledge
events, control the system notification appliance circuits and reset the system.
Detailed information about the nature and location of events can also be displayed.
The PMI is used as the primary user interface in CAB1, CAB2 or CAB3
enclosures. The PMI-REM is used as a remote user interface in
REMBOX2 and REMBOX4 enclosures. The PMI-INTL is used as the
primary or remote user interface in applications where French, Spanish
or Portuguese is the primary language. They are identical in all other
ways, and will be referred to in the remainder of this document as PMI.
The PMI contains the site specific program as developed in Zeus. All
system logic and supervision is provided by the controller in the PMI.
The PMI contains a ¼ VGA monochrome LCD, Touch Screen and LEDs
for displaying system status. An audible sounds when there are unac-
knowledged events on the PMI. The display is surrounded by keys that
are used to control the displayed information and to navigate through
these screens. Keys are also provided to obtain help and to enter into
the menu features of the PMI. (Refer to Figure 1.)
On the back of the PMI there are additional diagnostic displays to aid in
system troubleshooting. This is also where the PMI address is set and
where the connection is made to Zeus for programming. (Refer to
Figure 2.)
A contrast pot is provided on the back of the PMI to adjust the LCD for
the best visibility.
For systems configured to provide Smoke Controk (UUKL), refer to the
FireFinder XLS Control Panel System Manual, P/N 315-034853.
PRE-INSTALLATION
The PMI-INTL comes with French (Canadian) labels applied to the PMI. Labels in
three additional languages are also shipped with the PMI-INTL. To apply the labels for
an alternate language, first remove the French (Canadian) labels. Then select the
appropriate label—either English, Spanish, or Portuguese (Brazilian), from the Power
label kit, P/N 575-434249 and the Alarm label kit, P/N 575-434218. Remove the
backing from the labels and apply them to the PMI. (Refer to Figure 3.) Discard the
remaining labels.
Figure 1
PMI User Interface
More
Info
SECURITY
ALARM
SUPERVISORY
TROUBLE
SILENCED
PARTIAL SYSTEM
DISABLED
AUDIBLES
ON
POWER
?
+
_
....
10:32:05 04/15/01
SYSTEM STATUS: NORMAL
FireFinder-XLS
Siemens - Fire Safety
Person-Machine Interface
Installation Instructions
Models PMI / PMI-REM / PMI-INTL
