Getting started
12
© Siemens
A
G
2004, E:\A
uf
tr
ag\Siemens\Mob
ilePhones\FCCs\ax72\FUG\P
egasus_Main.fm
left page (12)
of AX72 Pegasus-DTC, FUG, us-en, A31008-H2860-A1-1-7619 (04.10.2005, 16:13)
VA
R Language: en; V
A
R is
sue dat
e: 050307
Getting started
Using the SIM card/battery
Your phone's display is delivered with a
protective film.
Remove this film before get-
ting started
. The service provider supplies
you with a SIM card on which all the im-
portant data for your account is stored. If
the SIM card is credit card-sized, snap out
the smaller segment and trim any rough
edges.
Press depression
1
to remove the
cover downwards in the direction of the
arrow
2
.
Insert SIM card
3
and push it fully into
the locating slot (make sure the angled
corner is in the correct position
4
).
To remove the SIM card push the card
here
5
.
Insert the battery sideways into the
phone
6
, then press downwards
7
until it engages.
To remove, press the retaining tab
8
then lift the battery out.
Place cover on phone and push to the
upper edge, until it clicks into place
9
.
Always switch off phone before removing
the battery!
Only 3-V and 1.8-V SIM cards are support-
ed. Please contact your service provider if
you have an older card.
1
2
3
4
5
7
8
6
9