Calling
Select the diagnose repeater in HW Config.
Select menu command PLC > Diagnostics/Setting > Module Information
Additional information:
Help on
STEP 7, topic "Diagnostics, hardware diagnostics and troubleshooting"
Overview
Topic
Detailed information
Called using
Additional information
Quick
overview
Error on bus
segment
Icons indicate the status
of the PROFIBUS master
systems
Module Information" dialog
box
● Status
● Icons in front of the tab
names (DP1, DP2,
DP3, PG)
Online help for
STEP 7
,
topic: "Hardware
diagnostics and
troubleshooting"
Comparison of configured
and inserted modules
DP slave
diagnostics
Diagnostic data for the
selected DP slave (in
accordance
with EN 50170)
"DP Slave Diagnostics" tab To determine the cause of
DP slave errors
Location of
error
Graphical representation
of the error location
7.18.7.5
SIMATIC PDM
Introduction
SIMATIC PDM is a software package for configuration, parameter assignment, commissioning,
and maintenance of field devices (for example, transducers).
Overview
Topic
Detailed information
Called via
Additional information
Quick
information;
display
configuration
Icons provide an
overview of the
configuration and
device status
(then: see device status
below)
In the SIMATIC Manager: View
> Process Device Plant View
Online help for
SIMATIC
PDM;
"Configuring
networks and devices"
Icons: ...> Functions >
Diagnostics > Overview
of device icons
Device
information
● Type
● EDD/DLL (type file)
● Manufacturer
● Versions
Open project in the Process
Device Plant View > Select
device > Edit > Object
properties >
Device" tab
Online Help for
SIMATIC PDM
Diagnostics in PCS 7
7.18 Diagnostic tools
Service support and diagnostics (V8.0)
114
Service Manual, 03/2012, A5E02779775-02
