manualshive.com logo in svg

Siemens OZW672 Series, Инструкции по вводу в эксплуатацию, Страница: 7 / 116

Поделиться
Скачать
Siemens OZW672 Series Скачать руководство пользователя страница 7

 

 

7 / 116 

Siemens 

Web server OZW672... V4.0 

CE1C5712en 

Building Technologies 

Overview 

28.08.2012 

1 Overview 

1.1 Introduction 

 

Product number  

Max. number of monitored devices 

OZW672.01 

  1 LPB

   

or 1 BSB device 

OZW672.04 

  4 LPBs or 1 BSB device(s) 

OZW672.16 

16 LPBs or 1 BSB device(s) 

 
 
The document describes commissioning and operating the web server OZW672. 
In this edition of "Web server OZW672, V4.0", the new "Energy indicator" function 
is described in Section 5. Sections 2 and 6 contain supplementary information on 
the DHCP client. 
 
 
The ACS790 PC software can also be used to commission and operate the web 
server OZW672. To simplify reading, this document focuses on commissioning  
and operating via web browser. 
 
 
This symbol draws your attention to special safety notes and warnings. 
Ignoring this type of note may result in device damage and personal injury. 
 
 

•

  Devices may only be used in building technical plants and for the described 

applications only. Comply with all local regulation (installation, etc.). 

•

  Disconnect the power and immediately replace a defective or obviously 

damaged device. 

•

  Do not open the device. Failure to comply will invalidate any warranty claims. 

•

  The technical data are provided solely for use with Siemens bus devices. The 

user ensures the functionality of operation when using third-party devices not 
expressly mentioned here. Siemens assumes 

no

 responsibility for service and 

warranty under these circumstances. 

 
 
Trouble-free and safe product operation presupposes transport, storage, mounting, 
installation, and commissioning as intended as well as careful operation. 
 
 

Dispose of the device as electronic waste in compliance with European directive 
2002/96/EEC (WEEE) and not as municipal waste. Observe all corresponding 
national, legal regulations, and dispose of the device via appropriate channels. 
Comply with all locally applicable laws and regulations. 

 
 

Type summary 

Document contents 

Focus on web 
browser operation 

Important notes 

 

Safety /  
Product liability 

Intended use 

Disposal 

Содержание OZW672 Series





















































































































Отзывы:

Нет отзывов