Siemens OZS164 SERIES WEB SERVER Скачать руководство пользователя страница 21

Страница: 21 / 108

2.5

Web server settings

Use the "Home" to set the web server. Select the web server and then the
corresponding operating page in secondary navigation.

•

The settings depend on the user level.

•

This section does not describe read-only data points.

Notes

2.5.1

Operating page settings "Time of day/date"

Path: Home > 0.5 OZS164… > Time of day/date

Time of day/date

The clock has a backup battery for at least 72 hours. The clock continues to run
after power failure for the duration of the backup battery.

Backup battery

Both date and time are reset in case of an extended interruption.

•

The time is corrected automatically if the time is synchronized to the master

clock on the LPB/BSB bus (see Section 2.5.2).

•

Otherwise, both date and time must be newly set.

Data point

Explanation, example

ime of day/date

Default val.: 00:00 1.1.2005
Setting val.: Time of day/date

Set the current time and date.

he weekday is calculated automatically.

21 / 108

Siemens Web

server

CE1C5711en

Building Technologies

Commissioning

25.08.2010

Содержание OZS164 SERIES WEB SERVER













































































































Результаты поиска

Содержание OZS164 SERIES WEB SERVER

Отзывы:

Siemens OZS164 SERIES WEB SERVER, Инструкции по вводу в эксплуатацию, Страница: 21 / 108

Результаты поиска

Содержание OZS164 SERIES WEB SERVER

Отзывы: