Operating the Telephone with the Display
22
Multiline Functions
Some functions and features are only available to you if the administrator
configured your telephone to support multiple lines. The following are
some examples of special multiline telephone features:
•
Line keys
•
Manual hold
•
Multiline priority
•
Visual indicators for line key status
Function Selection
A function is selected with the keys
<
or
>
and confirmed with the
:
key. The arrow icon (>) in the second line indicates that additional functions
are available. In idle mode, there are no menu options available (no prompt).
At the end of the menu list the
>
key goes to the beginning of the list, and
at the beginning of the list the
<
key goes to the end of the list.
When you select a function using the
:
key, you are led step by step
through the call procedure until all parameters have been entered.
Most features are common to single-line and multiline telephones,
but some features function in a slightly different manner depending
on the telephone type. In this manual, these differences are de-
scribed in the same section that describes single-line telephone fea-
tures.
