Siemens OP15 Скачать руководство пользователя страница 84 | Manualshive

Страница: 84 / 177

Siemens OP15 Скачать руководство пользователя страница 84

10-2

Manual OP5, OP15

( ) J31069-D0840-U001-A2-7618

10.2 Modifying Parameters in Online Mode

The parameters set as default parameters for the OP interfaces during confi-
guration can be modified by means of standard screens. To do this, proceed
as follows:

1. Depending on the OP you are using, choose one of the standard screens

marked System

→

IF

2. Scroll through the parameter list on the display using the UP and DOWN

arrow keys to the parameter you require. Some of the parameters dis-
played cannot be modified.

3. Choose the value for the parameter by using a symbolic value.

4. Exit from the standard screen – for example, by pressing the ESCAPE

key.

The default settings configured for printouts on the connected printer can be
modified by means of a standard screen. In this instance, you can set the fol-
lowing:

characters per line (parameter values: 20, 40 or 80)

lines per page (parameter values: 60 to 72)

message log (ON, OFF).

With message printing enabled (ON), every alarm message and event mes-
sage can be printed in online mode as they arrive and depart (alarm messages
also when they are acknowledged). OFF disables printing.

To set the parameters for your printer, proceed as follows:

1. Choose the standard screen System

→

Printer.

2. Scroll through the parameter list on the display using the UP and DOWN

arrow keys.

3. Choose the value for the parameter at the cursor location by using a sym-

bolic input.

4. Exit from the standard screen – for example, by pressing the ESCAPE

key.

To define whether the oldest or the most recent alarm messages (for first/last
message refer to section 7.3) is displayed when several are waiting to be dis-
played, proceed as follows:

1. Choose the standard screen System

→

DispMsg.

2. Select the corresponding parameter, i.e. either First or Last.

3. Exit from the standard screen – for example, by pressing the ESCAPE

key.

Modifying inter-
face parameters

Modifying printer
parameters and
setting message
logging ON/OFF

Setting first/last
message display

System Settings on Standard Screens

«
...
82
83
84
85
86
...
»

Содержание OP15


















































































































































































Отзывы:

Нет отзывов