Siemens OP15 Скачать руководство пользователя страница 63 | Manualshive

Страница: 63 / 177

Siemens OP15 Скачать руководство пользователя страница 63

7-13

Manual OP5, OP15
( ) J31069-D0840-U001-A2-7618

If the remaining buffer size is still not freed by this action, more messages
are deleted, in the following order, until it is depleted:

Acknowledged alarm messages yet to depart

Unacknowledged alarm messages that have already departed

Unacknowledged alarm messages yet to depart.

If a log layout has been configured and a printer ready for operation is at-
tached to the OP, forced printout of all deleted messages is enabled .

7.5.3

Automatically Deleting the Event Buffer upon Buffer Overflow

By default, an overflow warning is output to the display when the event buff-
er reaches the configured remaining buffer size. Output of the overflow warn-
ing can be enabled and disabled online by means of the standard screen
Events

→

Overflow. If the event buffer cannot accept any more messages,

those which have already departed are the first to be deleted automatically
until such time as the configured remaining buffer size is reached.

If the remaining buffer size is not freed by this action, as many of the oldest
event messages are deleted – irrespective of priority and message status (ar-
rived, departed) – as are necessary to restore the configured remaining buffer
size.

If the remaining buffer size is still not available, as many of the oldest wait-
ing messages are deleted as are necessary to restore the remaining buffer size.

If a log layout has been configured and a printer ready for operation is at-
tached to the OP, forced printout of all the deleted messages is enabled.

7.5.4

Automatically Deleting the System Message Buffer upon Buffer
Overflow

If the system message buffer is completely full, the oldest message is deleted
automatically from the buffer when another system message occurs. There is
no overflow warning or forced printout of the deleted message, in the case of
event and alarm messages.

Deletion order

Forced printout

Remaining buffer
size and buffer
overflow

Forced printout

Definition

Message Handling

«
...
61
62
63
64
65
...
»

Содержание OP15


















































































































































































Отзывы:

Нет отзывов