Siemens OP15 Скачать руководство пользователя страница 59 | Manualshive

Страница: 59 / 177

Siemens OP15 Скачать руководство пользователя страница 59

7-9

Manual OP5, OP15
( ) J31069-D0840-U001-A2-7618

7.4

Viewing Message Buffers

Messages displayed on the OP are written to the message buffer concerned.
The message buffers can be called to view message history by means of stan-
dard screens.

The times of occurrence, acknowledgment and departure are displayed in
chronological order for all messages.

Choose the standard screen Alarms

→

View.

The messages contained in the alarm buffer are shown on the alarm message
list together with their message number, the date and time of their occurrence
and the message status (arrived, departed or acknowledged) and their ac-
knowledgment group on the display:

Q–Gr/No.

04/112

K

on

08.12.92

09:34:00

Q–Gr/No.

04/112

Q

on

08.12.92

09:35:42

Figure 7-2

Example Display of Alarm Buffer (Shown here for OP15/A)

Explanation relating to example display (first message):

Using the UP and DOWN arrow keys, you can now scroll through the mes-
sage text.

Q–Gr/No.

Details relating to next field: acknowledgment group and
alarm message number.

04/112

The displayed alarm message belongs to acknowledgment
group 04, the alarm message number is 112.

K

Message has arrived

Q

Message has been acknowledged

G

Message has departed

on

date time

Date and time of arrival/acknowledgment/departure of
alarm message.

Display of message text relating to selected alarm mes-

sage:

Return to alarm message list:

To obtain an overview of all the alarm messages and the total number of
alarm messages still waiting in the buffer, choose the standard screen
Alarms

→

Number.

Message buffer

Viewing the alarm
buffer

Viewing total num-
ber of messages in
event buffer

Message Handling

«
...
57
58
59
60
61
...
»

Содержание OP15


















































































































































































Отзывы:

Нет отзывов