Siemens OP15 Скачать руководство пользователя страница 36

Страница: 36 / 177

4-4

Manual OP5, OP15

( ) J31069-D0840-U001-A2-7618

4.1.1

ESCAPE

Functions

Pressing ESCAPE cancels field inputs provided that they have not been ter-
minated by pressing ENTER.

In addition, it is used to reply in the negative to a delete request in response
to a corresponding prompt by the system.

If the ESCAPE key is pressed within a screen, you branch back to the config-
ured cross-jump destination (by default, the last position called) and, finally,
from the start screen to the message level.

To avoid branching back further than the message level, press the ESCAPE
key.

At message level, the ESCAPE key is used to hide a system message.

To cancel the display of information text, press ESCAPE to return to the pre-
vious display.

To cancel scrolling through messages at the message level, press ESCAPE to
reset the display to the current message.

Cancel

Branch backward

Hide system
message

Cancel display of
information text

Reset while
scrolling through
messages

General Operation

Содержание OP15













































































































































































Результаты поиска

Содержание OP15

Отзывы:

Siemens OP15, Руководство по эксплуатации оборудования, Страница: 36 / 177

Результаты поиска

Содержание OP15

Отзывы: