Siemens OOH740-A9-Ex Скачать руководство пользователя страница 7

Страница: 7 / 72

About this document

Applicable documents

Building Technologies

A6V10367521_h_en_--

Fire Safety

2015-02-02

1 About this document

Retention and availability

NOTICE

Missing information
Damage due to misuse

●

This document must be available in a usable format throughout the entire life

cycle of the product. Keep the document for reference and ensure that it can

be accessed by target groups.

Should you require another copy of this document, please contact the Customer

Support Center, phone +49 89 9221-8000.

Goal and purpose

This document contains all the information relating to the automatic fire detector

OOH740-A9-Ex. Following the instructions consistently will ensure that the product

can be used safely and without any problems.
This document is aimed at users who are planning, installing, commissioning,

operating, and maintaining a fire detection installation FS720 or SIGMASYS with a

line card (FDnet/C-NET) with addressed detector lines within the scope of Directive

94/9/EC (ATEX directive) or IECEx.
General knowledge about the structure and function of fire detection installations

FS720 is required in order to understand the information.

The use of peripheral devices on collective detector lines in potentially explosive

atmospheres is described in document 001204.

See chapter 'Applicable documents'.

WARNING

Document A6V10324618 is an integral part of this document. You must observe

the information in both this document and document A6V10324618!

Before installing the device, you must make yourself familiar with the content of

document A6V10324618 'Planning, Mounting/Installation, Commissioning,

Maintenance of fire detection installations with addressed detector lines in

potentially explosive atmospheres'. You can download the current version of the

document from the Internet, at the address

http://siemens.com/bt/download

Содержание OOH740-A9-Ex









































































Результаты поиска

Содержание OOH740-A9-Ex

Отзывы:

Бренды по названию

Популярные бренды

Siemens OOH740-A9-Ex, Техническое руководство

Результаты поиска

Содержание OOH740-A9-Ex

Отзывы:

Бренды по названию

Популярные бренды