Siemens Novigo Core, Установка, монтаж

Страница: 95 / 121

Connect external components
Desk call station PT2001-A1
7
A6V11940317_en--_a 95 | 121
7.1.9 Analog control inputs
The PT2001-A1 provides 6 analog control inputs. These analog control inputs
measure the voltage between the GND and the DC 10 V.
The values can be used as a local gain control or as control values for the audio
output volume.
Analog control inputs connector - 'CN1'
Pin Description Remark
1 Analog input 1 -
2 Analog input 1 -
3 Analog input 3 -
4 Analog input 4 -
5 Analog input 1 -
6 Analog input 1 -
7 Logic output 1 Not to be used as the analog inputs
8 Logic output 2 Not to be used as the analog inputs
9 Logic output 3 Not to be used as the analog inputs
10 Logic output 4 Not to be used as the analog inputs
11 GND -
12 10 V -
Table 75: PT2001-A1 analog control inputs connector - 'CN1'
For more information, see
Use analog control inputs [ ➙ 56]
.
7.1.10 PACE-Bus RS232 serial interface
This 'PACE-Bus' (RS232) interface is used to connect the 'Desk call station
extension (24 buttons)' PTO2001-A1. It can be used to connect control panels or
for logging data.
'PACE-Bus' (RS232) connector - 'CN4'
Pin Description Remark
1 TX -
2 RX -
3 GND -
Table 76: PT2001-A1 'PACE-Bus' (RS232) connector - 'CN4'
7.1.11 Mount the SD card
The PT2001-A1 is equipped with a micro SD card slot. The SD card is used to
store messages and sound files. Only the approved industrial grade SD card
should be used. (Preferred: 'ATP AF2GUD-2*** SD 2 GB Card' PCA2002-A1)