Siemens MS Series, Инструкция по эксплуатации, Страница: 116 / 130

SITRANS P, MS series
116
C79000-B5674-C40-04
Technical Data
Process pressure limits
7.1 Dimensions
1)
Take into account an additional about 20 mm thread length for screwing on
1 Process connection, ½ – 14 NPT or muff G½A
2 Connection box cover
1)
3 Electronics side, digital indicator (option)
4 Orientation mark (see Chapter 5.1.3, p. 104)
5 Permissible rotation range, shaded in the diagram
6 Locking screw
7 Screw cover safety bracket (only for flameproof
enclosure, not shown in the diagram)
8 Dummy plug (only for Pg 13.5 and Han 7D)
9 Electrical connection:
Screw type gland Pg 13.5 or
M20 x 1,5 or
1/2-14NPT or
Plug Han 7D / 8U
Figure 26 SITRANS P, MS series transmitter for pressure, dimensions
Span Maximum working pressure
Up to 1 bar (14.5 psi) 6 bar (87 psi)
Up to 4 bar (58 psi) 10 bar (145 psi)
Up to 16 bar (232 psi) 32 bar (464 psi)
Up to 63 bar (914 psi) 100 bar (1450 psi)
Up to 160 bar (2320 psi) 250 bar (3625 psi)
Up to 400 bar (5802 psi) 500 bar (7252 psi)
2
ca
.175
1
3
5
5
4
6
5
7
8
9 9