Tips for Integrating with an OPC client
84
Building Technologies
048_DMS_MK8000_ICC_MP4.30_A6V10062407_a_en
Fire Safety & Security Products
06.2010
Fig. 84 MM8000Server Properties - Identity tab
On Windows XP systems, in case of difficulties related to the DCOM functions,
you can get an advanced diagnostic log by activating the DCOMXPLogEnable.reg
command (see in C:\Program Files\DMS8000\Utilities\Reg).
This command modifies a registry value that results in a detailed DCOM function
tracing being enabled in the Windows application event list (start the ‘Event
Viewer’ in the ‘Windows Administration Tools’ to see the list).
Use the ‘DCOMXPLogDisable.reg’ command to stop the log being generated.
6.4.3
DCOM settings on OPC clients
In the networked OPC client stations, in order to avoid potential conflicts when
callbacks are sent from the server, the DCOM must have the same setting as that
of the server.
