manualshive.com logo in svg

Siemens Milltronics WD600, Руководство по эксплуатации

Поделиться
Скачать
Siemens Milltronics WD600 Скачать руководство пользователя страница 28

Service and maintenance 
7.3 Spare parts 

26

 

Milltronics WD600 

Operating Instructions, 09/2016, A5E38964753_A

B

 

7.3

 

Spare parts 

The only spare parts recommended for the belt scale are the load cell and the Delrin slider pads. 

Refer to the load cell nameplate for the proper size and model number. Re-balance any load cell 

that has been replaced. 

7.4

 

Technical support 

If you have any technical questions about the device described in these Operating Instructions 

and do not find the right answers, you can contact Customer Support:  

●

Via the Internet using the Support Request:

Support request (

http://www.siemens.com/automation/support-request

) 

●

Via Phone:

– Europe: +49 (0)911 895 7222
– America: +1 423 262 5710
– Asia-Pacific: +86 10 6475 7575

Further information about our technical support is available on the Internet at  
Technical support (

http://support.automation.siemens.com/WW/view/en/16604318

) 

Service & Support on the Internet 

In addition to our documentation, we offer a comprehensive knowledge base online on the 

Internet at:  
Service & Support (

http://www.siemens.com/automation/service&support

) 

There you will find: 

●

The latest product information, FAQs, downloads, tips and tricks.

●

Our newsletter, providing you with the latest information about your products.

●

Our bulletin board, where users and specialists share their knowledge worldwide.

●

You can find your local contact partner for Industry Automation and Drives Technologies in

our partner database.

●

Information about field service, repairs, spare parts and lots more under "Services."

Additional Support 

Please contact your local Siemens representative and offices if you have additional questions 

about the device 
Find your contact partner at: 
Local contact person (

http://www.siemens.com/automation/partner

) 

Содержание Milltronics WD600



































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды