Siemens MICROMASTER 440 Series, Руководство по эксплуатации

Страница: 8 / 117

International English Foreword
MICROMASTER 440 Operating instructions
6SE6400-5CA00-0BP0
7
Safety Instructions
The following Warnings, Cautions and Notes are provided for your safety and as a
means of preventing damage to the product or components in the machines
connected. This section lists Warnings, Cautions and Notes, which apply generally
when handling MICROMASTER 440
Inverters, classified as
General
,
Transport &
Storage
,
Commissioning
,
Operation
,
Repair
and
Dismantling & Disposal
.
Specific Warnings, Cautions and Notes
that apply to particular activities are
listed at the beginning of the relevant chapters and are repeated or supplemented
at critical points throughout these sections.
Please read the information carefully, since it is provided for your personal
safety and will also help prolong the service life of your MICROMASTER 440
Inverter and the equipment you connect to it.
General
Warnings
♦
This equipment contains dangerous voltages and controls potentially
dangerous rotating mechanical parts. Non-compliance with
Warnings
or
failure to follow the instructions contained in this manual can result in loss of
life, severe personal injury or serious damage to property.
♦
Only suitable qualified personnel should work on this equipment, and only
after becoming familiar with all safety notices, installation, operation and
maintenance procedures contained in this manual. The successful and safe
operation of this equipment is dependent upon its proper handling,
installation, operation and maintenance.
♦
Risk of electric shock. The DC link capacitors remain charged for five minutes
after power has been removed.
It is not permissible to open the
equipment until 5 minutes after the power has been removed.
♦
HP ratings are based on the Siemens 1LA motors and are given for
guidance only; they do not necessarily comply with UL or NEMA HP
ratings.
Caution
♦
Children and the general public must be prevented from accessing or
approaching the equipment!
♦
This equipment may only be used for the purpose specified by the
manufacturer. Unauthorized modifications and the use of spare parts and
accessories that are not sold or recommended by the manufacturer of the
equipment can cause fires, electric shocks and injuries.
Notes
♦
Keep these operating instructions within easy reach of the equipment and
make them available to all users
♦
Whenever measuring or testing has to be performed on live equipment, the
regulations of Safety Code VBG 4.0 must be observed, in particular §8
“Permissible Deviations when Working on Live Parts”. Suitable electronic
tools should be used.
♦
Before installing and commissioning, please read these safety instructions
and warnings carefully and all the warning labels attached to the equipment.
Make sure that the warning labels are kept in a legible condition and replace
missing or damaged labels
http://nicontrols.com