Siemens MAMMOMAT NovationDR Скачать руководство пользователя страница 71

Страница: 71 / 95

5-20

February 5, 2004

FFDM-S Service Manual

Upgrading the PXCM Software

NOTE:

Typically, you will be upgrading an PXCM software only at the direction of Direct Radiography

Corp., or if you suspect that the current software is corrupt.

To upgrade the PXCM’s software:

1. Click the Software Upgrade link on the PXCM Control Panel page, or the

Upgrade link on any of the other PXCM pages.
The Upgrade PXCM Software page displays.

NOTE:

For security purposes, you may be prompted to enter a login name and password before

executing this function. For more information, refer to “Function Security Levels and Login Prompts”
on page 5-2.

2. For the

Select the package to be upgraded

option, select

siemens

3. Select whether you want to overwrite all of the PXCM configuration files.

If you select the

Save reserved files

option, specify the files you want to

protect from being overwritten in the

Enter Configuration files to be

retained

field.

Содержание MAMMOMAT NovationDR
































































































Результаты поиска

Содержание MAMMOMAT NovationDR

Отзывы:

Siemens MAMMOMAT NovationDR, Руководство по установке, Страница: 71 / 95

Результаты поиска

Содержание MAMMOMAT NovationDR

Отзывы: