Siemens MAMMOMAT Novation DR Скачать руководство пользователя страница 114

Страница: 114 / 116

114

Appendix

MAMMOMAT Novation DR

SPB7-250.815.06.02.02

Siemens AG

12.05

CS SD 24

Page 114 of 116

Medical Solutions

5. Press the button Device Manager. If the IrDA port was disabled in the computer BIOS, it

should not be present in the list of available hardware. If the IrDA is present anyway and
its icon is not marked with a red cross:

6. Double-click on the device row.

7. Choose the tab General in the dialog box that appears.

8. In the section Device Usage, change the status to "Disabled in the current hardware

profile".

9. Exit the dialog by pressing the OK button.

Having performed the configurations described above, the Service Program should be
able to communicate without difficulties.

Starting up and using the service PC

1. Switch on generator and service PC. After initialization, the service PC shows: C:\>

2. Insert the diskette with the service program.

The screen shows:

\> or

4. Start the service program by typing 'SERVICE' (extension -c if you have a color dis-

play), then press <ENTER>. The program asks for the user's name:

Your name,

please

Type the name of the technician, for example NN, and then press <ENTER>.

5. The program asks for the password:

Password, please

Type the password (********)

and then press <ENTER>. The display window shows:

Main menu

6. Select the program part to be used with keys <

↓

> and/or <

↑

>, then press <ENTER>.

The selected program part is shown with a background:

Configuration

If necessary, additional subroutines can be similarly selected here.

7. Make the necessary entries in the appropriate part of the program. Save the entered

data with <F2>. Page back in the program with <ESC>. The appropriate instructions
are shown on the monitor.

8. End the procedure with the service PC using <F10>.

Troubleshooting PC connection

If communication with the MAMMOMAT Novation

still cannot be established, follow the

instructions in this section. The following procedure will disable the buffering of the RS232
port. This example is for Windows

2000 Pro.

1. Choose Settings from the Start Menu.

2. Choose Control Panel.

3. Choose System.

Select the appropriate drive

{

A:}

{

}

and then press <ENTER>.

Содержание MAMMOMAT Novation DR





















































































































Результаты поиска

Содержание MAMMOMAT Novation DR

Отзывы:

Siemens MAMMOMAT Novation DR, Руководство пользователя, Страница: 114 / 116

Результаты поиска

Содержание MAMMOMAT Novation DR

Отзывы: